Google analytics

Sunday 8 May 2011

Marine Engineering now.

Wave ruler

If you’ve been reading my previous posts blathering on about marine engineering in the dim and distant past. This post I hope will illustrate the change from those days.

My last ship before retiring was state of the art. No big cathedral type engine or inefficient boilers and steam turbine any where in sight. No standing at a manoeuvring station pulling large levers just to try and make the ship move. Now it’s just done with the aid of a trackball and a click of a button on a keypad.

No big engine, instead the whole thing is electrically propelled.

Propulsion

The ship's diesel-electric propulsion system is based on a 14MW ALSTOM variable speed, bi-directional AC electric drive motor, controlled by a CEGELEC synchro-converter.

Four generators, supplied by ALSTOM and each providing 4.69MW, are driven by Wartsila V12 VASA32 (Lox Nox) diesel engines. The engines drive a single fixed pitch propeller and shaft.

The ship is equipped with an 18t thrust electric bow thruster and a 12t thrust electric stern thruster. The ship's auxiliary diesel engine provides 1.6MW.

The ships propulsion system provides a maximum speed of 21 knots and a minimum sustainable speed of 4 knots for up to 12 hours, without detriment to the machinery. The range exceeds 8,000 nautical miles.

And guess what? All this is controlled by a joystick on the bridge. At idle there is just one generator connected to the propulsion motor. If more speed is required then generators start and connect themselves automatically, with the reverse happening when speed is reduced. Even parallel parking is made easy. Just point the joystick in the direction you want to go and the computers control the prop and the thrusters and neatly slot you where you need to be.

Running out of water? Not in this day and age. Part of my remit was to operate and maintain the two reverse osmosis plants that could produce from sea water, 100,000 litres of fresh water per day!

Now these plants looked really complicated, as there were pipes and control valves packed onto a skid and looked truly baffling to an outsider (including my boss). When we were running low on potable water I would tell my boss that I was going to start making water and he would nod sagely and leave me to what he thought was a difficult task. OMG it was. Can you imagine the difficulty of standing in front of the control panel and pressing the area on the  touch screen marked “Start”?

Another of my responsibilities was to look after the refrigeration plant. This is an area of marine engineering that has been considered as on par with the black arts by many in the engineering fraternity. In the past we had dedicated fridge engineers to look after this aspect of engineering. Due to austerity measures they were eased out and engineers such as myself did conversion courses in this necromancy. Now refrigeration has a basic cycle of compression, cooling, expansion, and evaporation. And unless someone repeals the laws of physics, this is how all fridges are going to work for the foreseeable future.

First compress the vapour, next cool it in the condenser till liquid. After that the expansion valve expands some of the liquid into vapour causing rapid cooling of the mixture which passes through the evaporator in the freezer chamber, absorbing heat from the produce contained therein. The trick is to adjust the expansion valve so that all the liquid is turned to vapour before returning to the compressor, as compressors seriously hate liquid.

The other good thing about modern ships is Engineers no longer have to stand those tedious watches of four hours on and eight off. Nowadays there is one Engineer Officer of the Day in charge of the running of the machinery, and when it gets to the end of the working day he kicks everyone else out of the machinery spaces locks the door, sets the alarm system to broadcast to his cabin, and hopes for a quiet night.

Anyone out there like to know about Replenishment at Sea?

Wait for my post about sin and debauchery prevalent in the sixties, coming to a blog near you.

16 comments:

  1. Problem is of course it only looks good till it goes wrong and then that's where the real engineering skills come in.

    ReplyDelete
  2. Captain Haddock8 May 2011 at 22:33

    Oooh "Razzing" .. Lol

    Coston-Gun line ? .. Ballastite Cartridge(s) ? .. Gas Plug (arse about face) in SLR ? .. "Buffer" going apeshit at the least, little drop of FFO landing on "his" upper-scupper ?

    Yeah .. Go on then FE .. ;)

    ReplyDelete
  3. So, that ship was a hybrid, then?

    ReplyDelete
  4. Reverse Osmosis caused a General Protection Fault in module < unknown > and will be shut down.

    Please restart the ship.

    ReplyDelete
  5. Wish I'd sailed in ships propelled by electricity.
    All of mine used either diesel oil or heavy fuel oil.
    Oh, and in emergency I once fired up a boiler with timber (...about 20 years ago. I'm probably the last man on the planet to do that .
    He wasn't far wrong, but I wasn't letting on).
    Brgds
    Peter Melia

    ReplyDelete
  6. It was the chief, over a beer afterward, who wasn't far wrong, when he told me that he thought I was quite mad.
    Sorry.
    Brgds
    Peter Melia

    ReplyDelete
  7. AE, Believe it or not the ship had an auto reboot system called black start.
    It would automatically start a good generator and then progressively reinstate machinery to ensure the ship was in a safe condition.

    ReplyDelete
  8. Captain.

    You'll have to be patient. I'm still working on the delights of Sembewang village and Bugis street.

    ReplyDelete
  9. There's a series on Discovery called "Mighty Ships". One of them had a similar arrangement, although I think it was a pair of V12's and a pair of V16's. Out of curiosity how quickly could 3 engines be auto started and run up to full power? I imagine they wouldn't take kindly to sudden changes in temperature.

    The chief engineer was a genial Russian, who was always to be seen covered in black oil and grease...

    ReplyDelete
  10. Microdave.

    The non running engines are kept up to working temperature with electric heaters inserted in their cooling systems.

    ReplyDelete
  11. Thanks - presumably also in the lubricating oil system?

    As an aside - would 2 or more be kept running when the ship was approaching port, or manoeuvring within? I imagine the ability to rapidly change power settings & direction would be more important in those situations.

    ReplyDelete
  12. Captain Haddock9 May 2011 at 23:13

    No probs FE .. I can wait, but looking forward enormously to another "run ashore" down memory lane ..

    If only I'd known then, what I know now .. ;)

    Remind me to spin you the dit sometime, of how HMS Intrepid's intended week-long visit to Durban ended up being nearly 3 months long .. that involves Stokers, Propulsion & some very strange goings-on .. :)

    ReplyDelete
  13. Apropos the "Black Start".

    What FE is not telling anyone, is that this ship also had one of these, for When All Else Failed.

    "...a genial Russian (could be any race really), who was always to be seen covered in black oil and grease...

    Brgds
    Peter Melia

    ReplyDelete
  14. MD.

    Yes we normally had to generators for entering or leaving port, and any other close quarters situation.

    ReplyDelete
  15. @ Peter Melia - The only problem is what he would be able to do when the computer controlled Common Rail injection system, or the Inverter Drive for the propulsion motor packed up...

    Mechanical systems can always be "bodged" to get you home, the same with simple AC/DC electrics controlled by selectable tappings and rheostats, but when all the clever stuff is done by microcomputers you are dependent on having working spares for all of them.

    Hence the saying "Nothing can go wrong, go wrong, go wrong, go wrong"....

    ReplyDelete

Say what you like. I try to reply. Comments are not moderated. The author of this blog is not liable for any defamatory or illegal comments.